PROCHEM®ULTRA-DX ADHESIVE REMOVER MEDIUM VISCOSITY
SKU Quick Overview:
ProChem® Ultra-DX is a specially formulated dual purpose stripper. ProChem® Ultra-DX will break-down and liquefy cyanoacrylate (instant) adhesives. ProChem® Ultra-DX will also break the bond on a post-hardened emulsion which allows the emulsion to be removed. This will improve the speed and efficiency of the reclaim procedure on difficult post-hardened screens. Unlike high alkaline cleaners, ProChem® Ultra-DX will not harm the fabric. ADHESIVE DEBONDER / REMOVER - Apply ProChem® Ultra-DX directly to the adhesive and let dwell. The product will break the adhesive bond in 1-3 minutes. Allow to dwell for 20-30 minutes to liquefy the adhesive. Can be used in a dip tank application. Re-tensionable frames only! EMULSION HARDENER REMOVER - Apply ProChem® Ultra-DX to both sides of a dry screen, directly onto the post-hardened emulsion. Scrub both sides of the screen with a brush or pad. Allow ProChem® Ultra-DX to dwell on the screen for 3-5 minutes. Some hardened emulsions may require a longer dwell time. High pressure water rinse both sides of the screen. Do Not let the product soak on the adhesive with stretch-and-glue frames. ProChem® Ultra-DX will attack the adhesive. AVAILABLE PACK SIZES: 1 QT. | 1 GAL. | 5 GAL. | 30 GAL. (DRUM) | 55 GAL. (DRUM) WARNING: This product can expose you to N-methyl-2- pyrrolidone, which is known to the State of California to cause birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Write Your Own Review